Product Catalog

 

Contact Information

ADD: Houjie Industrial Zone,Huancheng East Road,Liushi town,Wenzhou city,Zhejiang province,China,325604
TEL: 008657762780255
FAX: 008657762790455
EMAIL: chrx@chrx.cn
MSN: chrx@chrx.cn

 

 

Certificate

intelliget capacitor
 

 Introduction::

RXZNG Series and RXZNF Series intelligent combined low-voltage power capacitor is a new generation 0.4KV low-voltage reactive-load compensation equipment, which reduces energy consumption, improves power factor and improves electric energy quality. It mainly consists of a measurement control display module, combination switch unit, breaker protection unit and a 0.4KV low-voltage power capacitor with a temperature sensor. Integrated structure is adopted by the device to replace low-voltage complete equipment composed of complicated mode of wiring and dispersed components such as general intelligent controller, fuse, combination switch or alternating current contactor, thermal relay, low-voltage power capacitor and indicator lamp, thus to ensure simple wiring, easy installation and commission, and convenient maintenance. Combined low-voltage power capacitor can be used as a unit set and also on-line applied with multiple units through networking. Our reactive-load compensation measuring and control equipment can be selected to match in case of high compensation capacity and the need of display the parameters such as voltage, current, power factor, reactive and active power, compensating current and etc.

 

Environmental Conditions

Ambient temperature: -25℃~+60℃  Relative humidity: 30%~85%RH  Altitude: ≤2000m
Power Supply Conditions
Rated voltage: 220V~450V  Voltage deviation: ±5%  Harmonic voltage: Sine wave, with total distortion rate no more than 5%        Working frequency:50HZ 
Harmonic current: The allowable harmonic current at the point of common coupling shall not exceed the value required in the standard BG/T14549-1993.  Power consumption: <0.2W/1kvar
Electrical Safety
Electrical clearance, creepage distance, insulation strength, safety protection, short circuit strength, as well as sample circuit protection and control circuit protection conform to the requirements of relevant clauses in the electric power industry standard of the People’s Republic of China DL/T842-2003
Measurement Error
Voltage: ≤±0.2%; Current: ≤±0.2%; Power: ≤0.2%; Power factor: ±1%; Temperature: ±1℃
Protection Error
Voltage: ≤0.5%; Current: ≤0.5%; Temperature: ±1℃; Time: ±0.1s
Reactive Compensation Parameters
Reactive compensation error: ≤50% of the minimum capacitor capacity;
Capacitor switching interval: >10s, to be set between 10-180s;
Reactive capacity: 5kvar, 10kvar, 20kvar
Networking: ≤32 sets
Reliability Parameters
ontrol precision: 100%;
Allowable switching times: 1 million times;
Attenuation rate of running time of capacitor capacity: ≦1%/year;
Switching attenuation rate of capacitor capacity: ≦0.1%/10,000 times;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Main Technical Parameters:
Working Environment
Relative humidity: 20%~90%RH @40℃
Altitude: ≤2000m
Other requirements: free of flammable and combustible medium, conducting dust or corrosive gas.
Working Power Supply
Working voltage: 380V±20%  Frequency: 50Hz  Distortion rate of voltage: ≤20%
Power consumption: ≤3W
Measurement accuracy
Voltage: ±0.5%
Current: ±0.5%
Power factor: ±1%
Reactive power: 1%
Control accuracy
Power factor: ±1%
Reactive power: minimum capacitor capacity±120%
 
 
 
 
 
Product Model & Size and Installation Diagram

 

Compensation Type
Model and Specification
Overall Dimension (foot stand included) L×W×H (mm)
Installation Dimension(mm)
Three-phase joint compensation
RXZNG/450/10(5+5)
400×80×225
370×50
RXZNG/450/15(10+5)
400×80×225
370×50
RXZNG/450/20(10+10)
400×80×245
370×50
RXZNG/450/30(15+15)
400×80×275
370×50
RXZNG/450/30(20+10)
400×80×325
370×50
RXZNG/450/40(20+20)
400×80×325
370×50
Split-phase compensation
RXZNF/250/5
400×80×225
370×50
RXZNF/250/10
400×80×245
370×50
RXZNF/250/15
400×80×275
370×50
RZNF/250/20
400×80×325
370×50

 

Related Products

 

YES, I am interested in your product, please contact me!
 

Product*
Email *
Message*
Your Name*
Company
Telephone
  
 
SendMessage